VMP Twinjet 67 mm Throttle Body For Gen2 Roush (Tune Required)

**Includes reverse Y harness for engine harnesses modified by Roush supercharger kit installation**
**Tuning Required – Must use factory 15-17 gear ratio and TPC config parameters (see below)**

• Now in black polish finish!
• Includes throttle body, reverse Y harness, metalized gasket, and bolts
• Assembled and tested with factory analog electronics already installed
• Works with 2015-17 Mustang GT 5.0 L and 2015-17 F-150 5.0 L
• Works with 2015-20 Mustang Shelby GT350 5.2 L
• Works with Ford Performance Gen2 Control Packs
• For VMP blower applications see VMP-TJ67-FR-V 
• For Naturally Aspirated Cobrajet applications see VMP-TJ67-FR-NA
• Twin blade design provides for excellent driveability and tunability 
• Utilizes right hand electronics – does not fit Odin/Loki superchargers – see VMP-TJ69-FL
• Based on GT500 bolt pattern of 70 mm x 140 mm
• Proudly made in the USA 

When Roush first released the supercharger kit for ’15-17 Mustang GT and F-150 they chose to use an older twin 60 mm throttle body from the first generation Shelby GT500. While this throttle body easily met the air flow requirements for 600 rwhp (727 crank HP) it would not scale beyond that. It also had another issue, it used a less accurate TPS sensor and weaker motor. The factory throttle body electronics in 2015 and up Fords addresses both these issues with a larger motor, improved gear ratio, and more accurate magnetic TPS sensor. We recommend modifying the vehicle with this improved design. VMP created the -F series of throttle bodies for this exact reason, to bring the better electronics to the 15-17 supercharged application.

The older GT500 style electronics are easily identifiable by the dual electrical connector design. Our package includes a reverse TB Y harness to bring both connectors back together.

The more air that flows into your engine, the more power it’ll generate. No stranger to maximizing airflow, VMP is constantly developing new and innovative products to get you those extra ponies you’re seeking. In a continued effort to satisfy consumers’ need for speed, VMP Performance is proud to offer the VMP Twinjet 67 mm throttle body for 2015-2017 Ford vehicles.

Built with the same digital electronics found on 2015-17 Mustangs and F-150s (designated by the F on the motor cover) VMP’s line of analog throttle bodies include native electronics. 

Designed for ease of use, the VMP Twinjet 67 mm throttle body is tested and set. Simply bolt the throttle body onto your Mustang or F-150 and load the proper tune.

TECHNICAL INFORMATION:

• Use factory 15-17 gear ratio and TPC config parameters
• Correct Open Loop Feed Forward and Effective Area Tables