Edelbrock Supercharger

Edelbrock Supercharger System #15666 is a 50-state emissions-legal bolt-on kit for 2019-2021 Chevy Silverado/GMC Sierra 1500 trucks with a 6.2L V8. This TVS R2650 kit installs under the stock hood with no cutting or modifications required.

Edelbrock Supercharger System #15666 is a bolt-on forced induction kit that features significant improvements for 2019-2021 Chevrolet/GMC 1500-series trucks with the 6.2L V8 engine. This kit is emissions-legal in all 50 states and provides a 44% increase in horsepower to 548 RWHP with a 36% increase in torque to 505 ft-lbs at the rear wheels when used with the supplied calibration and 3.75-inch pulley on 93-octane pump gas. An Edelbrock Supercharger is the perfect power adder whether you plan to tow a boat, haul heavier loads, or you just want to feel your truck come to life without sacrificing daily drivability. Edelbrock Supercharger Kit #15666 for Chevy/GMC trucks features a redesigned lid with more clearance under the cowl for easier installation and a restyled badge lets people know that your system is Made in the USA by Edelbrock. Installation of the Edelbrock Supercharger requires no cutting or modifications and fits neatly under the stock hood. If you’re concerned about the effect on MPG, the increase in power comes with little to no loss in fuel economy during normal driving thanks to the system’s integrated bypass valve that mitigates parasitic power loss. This is a true bolt-on kit that requires no additional modifications to the stock 6.2L engine. The Edelbrock Supercharger features a self-contained lubrication system with a 100,000-mile service interval and a patented high-capacity Dual-Pass 3-Core (DP3C) intercooler. The durable black powder-coating blends nicely with the engine and results in an attractive underhood presentation that looks like the factory put it there. Each kit includes a complete set of preformed hoses, hardware and a full-color manual that provides clear step-by-step instructions for ease of installation. Unlocking of the factory PCM is included in this kit. Covered by Edelbrock’s industry-leading 3-year/36,000-mile powertrain warranty.

• No cutting or modification to stock body or hood; Front drive, front inlet configuration; Dual-Pass Three core Air-to-Water Intercooler system and dual core low temp radiator; Integrated bypass valve for little to no decrease in fuel economy 

SPECS

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347156665
Vehicle Model	Sierra 1500
Gasket Or Seal Included	Yes
Quantity	Kit
Mounting Bracket Included	Yes
CARB Executive Order Number	D-215-123
Availability Note	Available to Order
Warranty	36 Months
Housing Material	Cast Aluminum
System Type	Stage 1 – Street System
Oil Capacity	150 mL
Internal Step Up	Yes
Center Housing Cooling Type	Intercooler
Maximum Torque	505RW (With 93 Octane) ft-lb
Outside Pulley Diameter	3.75 in
Maximum Horsepower	548RW (With 93 Octane)
Rotor Type	Eaton TVS 2650
Calibration	Yes
Mounting Hardware Included	Yes
Emissions Code	EO Number: D-215-123
Hazardous Materials Warning	WARNING: This product can expose you to Chromium and Zinc, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Supercharger systems without tuners are not eligible for supplemental warranty and are only emissions-legal when used with the correct Edelbrock program. For safety, the Edelbrock program retains the factory vehicle speed limiter setting. The Edelbrock program will disable the Flex-Fuel E85 capability (if originally equipped). For safety, the Edelbrock program retains the factory vehicle speed limiter setting. Calibrations, Tuners, or Programs supplied with supercharger systems are only compatible with vehicles designed for use in the United States or Canada. Edelbrock does not offer calibration support for any vehicle designed for use outside of the United States or Canada.
Finish	Black Powder Coated
Pulley Belt Width	6-Rib
Universal Or Specific Fit	Specific