Edelbrock Gen 2 Coyote

(Special Order)

Edelbrock supercharged 5.0L Ford Coyote crate engine part #46890 produced 785 hp and 660 ft-lbs. of torque (with 93 octane fuel) at the flywheel. The core of this engine is a brand new Ford lightweight aluminum block with forged and balanced crankshaft, forged Manley H-Beam connecting rods and Mahle forged aluminum pistons. Sitting on top is an Edelbrock supercharger with Eaton TVS R2650 rotors. Also included are the essential supercharger kit components, such as the 8 rib drive belt, electric intercooler water pump, intercooler plumbing and intercooler recovery tank, as well as fuel rails, 60 lb./hr. fuel injectors, coils, mass air flow sensor (MAFS) housing and re-usable air filter. Includes all front end drive accessories: water pump, alternator, idlers, tensioners, belts and hardware. Pair with universal heat exchangers for a complete installation. Engine Specifications: Finish: Black powder coated; Displacement: 5.0L (302 c.i.d.); Horsepower: 785 hp; Torque: 660 ft-lbs.; Compression: 9.5:1; Block: Ford Aluminum; Crankshaft: Forged; Pistons: Mahle Forged Aluminum; Rods: Manley Forged H-Bea; Camshafts: Stock Ford; Rocker Arms: Stock Ford 2-1 Ratio; Induction: Supercharger System; Cylinder Heads: Stock Four-Valve Aluminum w/ Boss 302 valve springs; Warranty: 2-year / Unlimited mileage

SPECS

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347468904
Quantity	Sold Individually
Wiring Harness Included	Yes
Main Bearing Cap Bolt Quantity	4-Bolt
Availability Note	Built to Order
Warranty	24 Months
Horsepower	785 HP
Type	Ford Coyote
Camshaft Type	243deg/254deg, .660/.651, 114 LSA
Rocker Arm Type	Ford OEM
Outside Pulley Diameter	3.00 in
Carburetor Type	Not Included
Rocker Arm Ratio	2:1
Induction Type	Supercharged
Spark Plugs Included	Yes
Intake Manifold Type	EFI
Oil Filter Included	Yes
Rear Main Seal Type	1-Piece
Hardware Included	Yes
Plug Wire And Boot Included	Yes
Compression Ratio	9.5:1
Construction Type	Assembled
Flywheel Included	No
Cylinder Head Type	Ford Racing
Piston Type	Forged Aluminum
Timing Cover Included	Yes
Cylinder Head Material	Aluminum
Valve Cover Included	No
Harmonic Balancer Included	Yes
Crankshaft Material	Forged Steel
Air Cleaner Type	Not Included
Distributor Included	No
Throttle Body Included	Yes
Displacement	302 cid
Oil Pan Included	Yes
Water Pump Included	Yes, Standard
Engine Block Material	Cast Iron
Torque	660 ft-lb
Rotor Type	Eaton TVS 2650, Black Powder Coated
Calibration	Yes
Alternator Included	Yes
ECU Included	Yes
Idler Pulley Included	Yes
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Chromium, Lead, and Zinc which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Crate engine #46890 includes a supercharger, wiring harness, pre-programmed ECU, electronic throttle pedal, oxygen sensors, MAFS, OBD-II diagnostic port, air filter, fuse box, water pump, hose, alternator, belts, idlers and hardware. This engine will require an EFI compatible fuel delivery system with a minimum flow of 90 gph at 70 PSI. Fuel pressure regulator with boost reference is required. Top of supercharger measures 20.83in from crank centerline. Supplied with Edelbrock Break-In Oil. Before starting engine, you will need to prime the oil system. Do not turn engine over with starter motor for priming.
Pulley Belt Width	8-Rib
Universal Or Specific Fit	Specific Fit