Deatschwerks In-Tank Brushless Fuel Pump With Single/Dual Speed Controller

The brushless DW440 fuel pump and controller kits are a direct performance replacement for Ford 2015+ Mustang GT and F150 5.0L Trucks. Includes C102 controller for low duty city driving and full duty for high load conditions like drag racing or full throttle. Excellent for N/A, Supercharged, Turbo or Nitrous builds. The DW440 flows 440LPH and supports 1000hp on gas or 750hp on E85. Each kit delivers a lot of flow in a small package. Fitment kits include all necessary hoses, clamps, filters and electrical connectors.

Features

• 440lph in-tank brushless fuel pump
• C102 Single/Dual speed controller
• 9-0906 install kit for 2015+ Mustang GT and 2015+ F150 5.0L
• Supports 1000hp on gas or 750hp on E85
• Include all necessary hoses, clamps, filters and electrical connectors

Compact Size – The DW440 measures 4″ from inlet to outlet, opening up lots of fitment options that did not previously exist for customers wanting to integrate brushless pumps into their fuel system

Bulkhead Wiring – Brushless pumps require a 4-wire connector for digital control. The DW440 pump kits includes bulkhead harness that allows pass-thru of the 4-wire system via a small 10mm hole which is easily added to an OE module tophat.

Venturi Outlet – Most modern pump modules utilize a venturi jet system to prevent fuel starvation at low tank levels and high G cornering/acceleration. The DW440 has an integrated 6mm outlet to drive these systems.

C102 Single Speed/Dual Speed Controller – Single speed is the simple 100% duty cycle constant on. Dual speed allows you to operate the DW440 at low duty cycle during normal driving conditions and full duty cycle during high load conditions.

Quality & Innovation

• 440LPH at 40psi 13.8v
• 620LPH at 40psi 20.0v
• Compatible with all fuels including methanol and e100
• Single speed/Dual speed or PWM controller options
• No brushes + No commutator = Ultimate Durability

Voltage and Endurance Testing
The 40 amp controller and brushless design make this pump the ideal candidate for use at voltages beyond typical 13.8 battery voltage. The pump and controller have been endurance tested at voltages up to 24v. At a recommended max intermittent voltage of 20v, the DW440 flows 620LPH at 40psi.