M/T ET Drag

Mickey Thompson ET drag slicks are designed, engineered, and built for outstanding performance, run after run. They feature a 2-ply wrinkle wall carcass with state-of-the-art compounds for a bigger contact patch. Radials are also available. The special rubber compound requires less heat than other brands of drag slicks, resulting in better traction and faster times. Plus, you’ll have fewer burnouts and a longer tire life. And, because they use more air pressure than other slicks, these tires are safer at higher speeds. Choose the size and sidewall style you prefer for your dragster.

*Stiff Sidewall
† High Growth Tire

ACCEPTABLE PRACTICE (EXCEPT ET STREET R, ET STREET R BIAS AND ET STREET S/S) FOR RIM WIDTH IS TREAD WIDTH PLUS OR MINUS ONE INCH.

WARNING: DO NOT USE ON DYNO.

IMPORTANT: ALL BIAS DRAG DRIVE TIRES MUST BE MATCHED TO BE WITHIN 1/2 INCH ROLL OUT.

NEVER USE RIM SCREWS ON RADIAL DRAG TIRES!

MICKEY THOMPSON COMPOUND SELECTION CHART

CONSTRUCTION

ST …… Suggested for manual transmissions (medium compound)
W …… Extra tread width (please note actual tread and section width on spec sheet)
S …… Stiff sidewall construction aids in quicker reaction time due to less tire distortion. Also good in high horsepower applications and for heavy cars (Over 3,000 lbs)
R …… Radial Construction

COMPOUNDS

L2 …… For Jr. Dragsters
L4 …… For Dragsters, lightweight vehicles and vehicles without rear suspension
L6 …… Good for High Horsepower – Boosted Applications
L7 …… For Motorcycles
L8 …… Good Compound for General Use
M5 …… Good Compound for General Use
R1 …… Special Compound for ET Drag Radial
R2 …… Special Compound for ET Street S/S, ET Street R & ET Street Radial Pro
X5 …… Cooler running version of M5
X8 …… Cooler running version of L8