Edelbrock Gen III 426 Hemi



Gen III 426 Hemi


Edelbrock 426 c.i.d. HEMI crate engine part #46126 produces an astounding 808 horsepower and 762 ft-lbs. of torque. The foundation is based on a new iron Mopar 392 block with a forged Manley crankshaft, forged Manley H-Beam connecting rods and forged aluminum pistons. Sitting on top is an Edelbrock supercharger system with Eaton TVS R2650 rotors. Also included are the essential supercharger kit components, such as the electric intercooler water pump, intercooler plumbing, intercooler recovery tank, as well as fuel rails, fuel injectors, coils, mass air flow sensor (MAFS) housing and re-usable air filter. The supercharger equipped on this engine features a driver’s side throttle body orientation for ease of intake routing. Pair with universal heat exchangers for a complete installation. Engine Specifications: Displacement: 426 c.i.d.; Bore: 4.090in; Stroke: 4.050in; Horsepower: 808; Torque: 762; Compression: 9.9:1; Block: New Mopar Iron; Crankshaft: Forged 4340; Pistons: Forged Aluminum -5cc; Camshaft: 226 Deg /234 Deg , .619/.612, 114 cl; Rocker Arms: Stock Gen III Hemi; Cylinder Heads: Edelbrock Performer RPM #61099; Fuel Injectors: 60 lb./hr., Siemens; Supercharger: Edelbrock R2650 TVS; Supercharger Belt: 100″ 6-Rib; Fuel Type: Requires 91 Octane Minimum


Manufacturer Edelbrock
Application Application Specific
UPC 00085347461264
Quantity Sold Individually
Wiring Harness Included No
Availability Note Built to Order
Warranty 24 Months
Fuel Injectors Included Yes
Main Bearing Cap Bolt Quantity 4-Bolt
Horsepower 808 HP
Carburetor Type Not Included
Camshaft Type 226deg/234deg, .619/.612, 116 LSA Hydraulic Roller
Rocker Arm Ratio Mopar OEM
Type Chrysler HEMI Gen III
Induction Type Supercharged
Intake Manifold Type Dual Pass, Black Textured Powder Coated
Compression Ratio 9.9:1
Plug Wire And Boot Included Not Included
Hardware Included Yes
Construction Type Assembled
Spark Plugs Included Yes
Oil Filter Included Yes
Cylinder Head Type Performer RPM
Manifold Material Aluminum
Rotor Type Eaton TVS 2650, Black Powder Coated
Rear Main Seal Type 1-Piece
Flywheel Included No
Valve Cover Material Cast Aluminum
Air Cleaner Type Not Included
Fuel Rails Included Yes
Valve Cover Included Yes
Piston Type Forged Aluminum
Water Pump Included Yes, Standard
Cylinder Head Material Aluminum
Displacement 426 cid
Distributor Included No
Throttle Body Included Yes, Hellcat 92mm
Torque 762 ft-lb
Engine Block Material Cast Iron
Harmonic Balancer Included Yes
Idler Pulley Included Yes
Crankshaft Material Forged Steel
Oil Pan Included Yes
Timing Cover Included Yes
Emissions Code


Hazardous Materials Warning WARNING: This product can expose you to Chromium, Lead, and Zinc which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes
  • Gen III 426 HEMI Crate Engine with Accessories (Electronics not included); This engine will require an EFI compatible fuel delivery system with a minimum flow of 100 gph @ 70 PSI. Fuel pressure regulator with boost reference is required. Top of supercharger measures 20.74″ from crank centerline.; A Mopar Oil Pan (PN 4893207AA) is used on this crate engines. NOTE: Mopar 45 Deg oil filter adaptor PN 53021610AF (not included) may be required for additional clearance on some applications.; Your engine is supplied with Edelbrock Break-In Oil. Before starting engine, you will need to prime the oil system. Do not turn engine over with starter motor for priming.
Universal Or Specific Fit Specific Fit
Valve Cover Type HEMI OEM, Black

Additional information

Weight 674 lbs
Dimensions 48 × 45 × 41 in