Edelbock 416 Gen V LT1

(Special Order Part)

Supercharged LT 416 Crate Engine with Accessories

Edelbrock LT1 Supercharged LT1 crate engine part #46756 produces an astounding 851 horsepower and 780 ft-lbs. of torque on 91 octane pump gas. The foundation of this engine is a brand new GM LT1 Gen V aluminum block with a forged and balanced Manley crankshaft, forged Manley H-Beam connecting rods and Manley forged aluminum pistons. The 10.5:1 compression ratio allows for safe and reliable supercharged performance on 91 octane pump gas. Sitting on top is an Edelbrock supercharger system with DP-3C intercooler and Eaton TVS R2650 rotors. Also included are the essential supercharger kit components, such as the electric intercooler water pump, intercooler plumbing, intercooler recovery tank, fuel rails, fuel injectors, mass air flow sensor (MAFS) housing and re-usable air filter. The supercharger equipped on this engine features a driver’s side throttle body orientation for ease of intake routing and Camaro ZL1/ CTS-V LT4 belt offset. Pair with universal heat exchangers for a complete installation.; Engine Specifications: Finish: Black powder coated; Displacement: 416 c.i.d.; Bore: 4.065in; Stroke: 4.000in; Horsepower: 851 hp; Torque: 780 ft-lbs.; Compression: 10.5:1; Block: GM LT1 Gen V Alum.; Crankshaft: Manley Forged 4340; Pistons: Manley Forged Aluminum – 20cc; Rods: Manley Forged H-Beam; Camshafts: 243 Deg /254 Deg , .660/.651, 114 LSA; Rocker Arms: GM LT1 Gen V; Induction: R2650 Supercharger; Cylinder Heads: Edelbrock Performer RPM #77119; Warranty: 2-year / Unlimited mileage

SPECS

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347467563
Quantity	Sold Individually
Wiring Harness Included	Yes
Main Bearing Cap Bolt Quantity	4-Bolt
Availability Note	Built to Order
Warranty	24 Months
Horsepower	851 HP
Ignition Coil Included	Yes
Type	GM LT1 Gen V
Camshaft Type	243deg/254deg, .660/.651, 114 LSA
Rocker Arm Type	LT1
Outside Pulley Diameter	3.25 in
Carburetor Type	Not Included
Rocker Arm Ratio	GM OEM
Induction Type	Supercharged
Spark Plugs Included	No
Intake Manifold Type	EFI
Oil Filter Included	Yes
Rear Main Seal Type	1-Piece
Valve Cover Material	Cast Aluminum
Hardware Included	Yes
Plug Wire And Boot Included	Yes
Compression Ratio	10.6:1
Construction Type	Assembled
Flywheel Included	No
Cylinder Head Type	Performer RPM
Piston Type	Forged Aluminum
Timing Cover Included	Yes
Cylinder Head Material	Aluminum
Valve Cover Included	Yes
Harmonic Balancer Included	Yes
Crankshaft Material	Forged Steel
Air Cleaner Type	Conical
Distributor Included	No
Throttle Body Included	Yes
Displacement	416 cid
Oil Pan Included	Yes
Water Pump Included	Yes, Standard
Engine Block Material	Cast Iron
Torque	779 ft-lb
Rotor Type	Eaton TVS 2650, Black Powder Coated
Calibration	Yes
Alternator Included	No
ECU Included	No
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Chromium, Lead, and Zinc which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	LT 416 Crate Engine with Accessories; This engine will require an EFI compatible fuel delivery system with a minimum flow of 100 gph @ 60 PSI. Fuel pressure regulator is required. Top of supercharger measures 20.80″ from crank centerline.; Your engine is supplied with Edelbrock Break-In Oil. Before starting engine, you will need to prime the oil system. Do not turn engine over with starter motor for priming.
Pulley Belt Width	8-Rib
Universal Or Specific Fit	Specific
Valve Cover Type	OEM, Black Powder Coated