Greddy V-Mount I/C Radiator Kit

V-mount Intercooler / Radiator Kit with ducting

Intercooler: Type 19F core dim: 255x400x100mm

Racing Radiator: (R32 size) Aluminum dim 355×631.8x48mm

Includes cold-side piping only – compression tube & cold-side intercooler pipe

for turbo upgrades

NOTICE:
  * Included A/C Hardline and Bracket will only fit Nippon Denso A/C equipped vehicles from 93-95.
Some slight bending may be required.

Actual product may vary from image shown above

12040703 – V2 FD3S V-mounter Intercooler/Radiator kit w/ rad. breather tank

FD3S RX-7 Type19 V-mount Intercooler Kit(s)

Initially designed for a drag racing set-up, the GReddy V-mounted Type-19 Intercooler / TWR Radiator kit for the Mazda (FD3S) RX-7, is also very popular with circuit track cars with aero hoods.  It features our renown, lightweight, tube and inner-fin, 3row air to air core, that measures L400xH266xW100mm with high-flow cast end-tanks and our high-capacity TWR L631xH355xW48 aluminum radiator. The two coolers each have specially designed bracketry to mount the pair in an ideal “V” configuration.  This favors engine cooling for the radiator, while still providing great flow and minimizing intercooler piping length for improved turbo response.  The provided air diversion panels help direct air from the front bumper opening to the two heat exchangers for maximum airflow and cooling.
 
There are three main kit types for the newer V2 design with the newer Airinx S air filters, a more basic kit p/n 12040703 for vehicles with upgraded turbo(s.) This leaves the “hot-pipe” and air intake open for the user to build their own custom layout.

Product Features

Mounting angle

The radiator mount angle is set taking into consideration the ease with which air can escape when driving.

Intercooler piping layout

Piping layout considering aero bonnet installation.

The full kit for the latter half comes with a special elbow that takes into consideration the passage area.

Air diversion panels

Air guide plates are included for the radiator and intercooler. Improves cooling efficiency by preventing air from escaping through the bumper opening.

Fresh air introduction layout

The air cleaner is placed as far forward as possible so that it is less affected by engine heat. Greddy has adopted AIRINX, which has both suction efficiency and dust collection ability.