Wishlist

Account

Cart

Edelbrock Gen 2 Coyote

$33,185.95

-

Crate Engine W/ 8 Rib W/ Tuner

Description

(Special Order)

Edelbrock supercharged 5.0L Ford Coyote crate engine part #46890 produced 785 hp and 660 ft-lbs. of torque (with 93 octane fuel) at the flywheel. The core of this engine is a brand new Ford lightweight aluminum block with forged and balanced crankshaft, forged Manley H-Beam connecting rods and Mahle forged aluminum pistons. Sitting on top is an Edelbrock supercharger with Eaton TVS R2650 rotors. Also included are the essential supercharger kit components, such as the 8 rib drive belt, electric intercooler water pump, intercooler plumbing and intercooler recovery tank, as well as fuel rails, 60 lb./hr. fuel injectors, coils, mass air flow sensor (MAFS) housing and re-usable air filter. Includes all front end drive accessories: water pump, alternator, idlers, tensioners, belts and hardware. Pair with universal heat exchangers for a complete installation. Engine Specifications: Finish: Black powder coated; Displacement: 5.0L (302 c.i.d.); Horsepower: 785 hp; Torque: 660 ft-lbs.; Compression: 9.5:1; Block: Ford Aluminum; Crankshaft: Forged; Pistons: Mahle Forged Aluminum; Rods: Manley Forged H-Bea; Camshafts: Stock Ford; Rocker Arms: Stock Ford 2-1 Ratio; Induction: Supercharger System; Cylinder Heads: Stock Four-Valve Aluminum w/ Boss 302 valve springs; Warranty: 2-year / Unlimited mileage

SPECS

Manufacturer Edelbrock
Application Application Specific
UPC 00085347468904
Quantity Sold Individually
Wiring Harness Included Yes
Main Bearing Cap Bolt Quantity 4-Bolt
Availability Note Built to Order
Warranty 24 Months
Horsepower 785 HP
Type Ford Coyote
Camshaft Type 243deg/254deg, .660/.651, 114 LSA
Rocker Arm Type Ford OEM
Outside Pulley Diameter 3.00 in
Carburetor Type Not Included
Rocker Arm Ratio 2:1
Induction Type Supercharged
Spark Plugs Included Yes
Intake Manifold Type EFI
Oil Filter Included Yes
Rear Main Seal Type 1-Piece
Hardware Included Yes
Plug Wire And Boot Included Yes
Compression Ratio 9.5:1
Construction Type Assembled
Flywheel Included No
Cylinder Head Type Ford Racing
Piston Type Forged Aluminum
Timing Cover Included Yes
Cylinder Head Material Aluminum
Valve Cover Included No
Harmonic Balancer Included Yes
Crankshaft Material Forged Steel
Air Cleaner Type Not Included
Distributor Included No
Throttle Body Included Yes
Displacement 302 cid
Oil Pan Included Yes
Water Pump Included Yes, Standard
Engine Block Material Cast Iron
Torque 660 ft-lb
Rotor Type Eaton TVS 2650, Black Powder Coated
Calibration Yes
Alternator Included Yes
ECU Included Yes
Idler Pulley Included Yes
Emissions Code

 

Hazardous Materials Warning WARNING: This product can expose you to Chromium, Lead, and Zinc which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes
  • Crate engine #46890 includes a supercharger, wiring harness, pre-programmed ECU, electronic throttle pedal, oxygen sensors, MAFS, OBD-II diagnostic port, air filter, fuse box, water pump, hose, alternator, belts, idlers and hardware. This engine will require an EFI compatible fuel delivery system with a minimum flow of 90 gph at 70 PSI. Fuel pressure regulator with boost reference is required. Top of supercharger measures 20.83in from crank centerline. Supplied with Edelbrock Break-In Oil. Before starting engine, you will need to prime the oil system. Do not turn engine over with starter motor for priming.
Pulley Belt Width 8-Rib
Universal Or Specific Fit Specific Fit

Additional information

Weight 726 lbs
Dimensions 44.5 × 36.5 × 36 in